Conference; Call Menu - Siemens MC60 User Manual

Conference

Call up to 5 parties one by one and
link them together in a conference
call. Some of the functions described
may not be supported by your service
provider or may have to be enabled
specially. You have established a
connection:
Open menu and select
y menu§
Hold. The current call is
put on hold.
Now dial a new number.
When the new connection
J
is established ...
y menu§ ... open menu and select
Conference. The held call is
joined.
Repeat procedure until all
participants are linked together
(up to 5 participants).
End
All calls in the conference
are ended when the End
B
key is pressed.

Call menu

The following functions are only
available during a call:
Open menu.
y menu§
Hold (p. 20)
Microphone If the microphone is
on switched off the person on
the other end of the line
cannot hear you (muting).
Also: Hold
Handsfree (p. 19)
Volume Adjust handset volume.
Conference (see left)
Durat/charges Display call duration and
(if set, p. 34) costs
accruing during the call.
Send DTMF (p. 32)
Call The original call is joined
transfer to the second one. For
L
you, both calls are now
ended.
Main menu Access to main menu.
Call status List all held and active
calls (e .g. conference
call participants).
Calling 21
down.
*