Activating/Deactivating Auto Answer; Adjusting The Loudspeaker Volume; Changing Ringtones - Siemens Gigaset SL55 Owner's Manual

a
Press and hold (idle status).
Activating/deactivating auto
answer
If you have activated this function, when
you get a call you can simply lift the hand-
set out of the charging cradle without hav-
ing to press the talk key c.
¢ ¢
w Ð
Handset
Auto Answer
Select and press
a
Press and hold (idle status).
Adjusting the loudspeaker
volume
You can set the loudspeaker volume for
handsfree talking to five different levels
and the earpiece volume to three different
levels. You can only make these adjust-
ments during an external call.
The handsfree volume can only be
adjusted when this function is set.
You are conducting an external call.
t
Press the control key.
r
Select volume.
Press display key if necessary
§Save§
to save the setting perma-
nently.
If t is assigned with another function,
e.g. when toggling :
Open menu.
§Options§
Volume Select and press
Configure setting (see above).

Changing ringtones

u
Volume:
You can choose between five volumes
(1–5; e.g. volume 2 = ˆ) and
the "Crescendo" ring (6; volume
increases with each ring =
‰).
‰
( = on).
§OK§
.
§OK§
u
Ringtones:
You can select various ringtones, melo-
dies or any sound from My stuff
(page 18).
You can configure the following functions
with different ringtones:
u
Calls: for external calls
Ext.
u
Internal Calls: for internal calls
u
Appointments: for set appointments
(page 20)
u
All: the same for all functions
Settings for individual functions
Set the volume and melody depending on
the type of signalling required. For exter-
nal calls, you can also make a setting so
that the caller's name is announced after
the first ringtone. To do this, however, the
corresponding voice pattern must first
have been recorded (page 13).
¢ ¢
w Ð
Audio Settings
Ringer Settings
q
Select setting, e.g.
Ext. Calls
r
Set volume (1–6).
s
Scroll to the next line.
r
Select melody.
s
Only with setting
Calls: skip to next line.
Ext.
r
Activate or deactivate
Announce.
This feature requires caller
display (CLI).
In idle status, you can also open the menu
by pressing t briefly.
Ringer Settings
Settings for all functions to ring the
same
¢ ¢
w Ð
Audio Settings
¢
Ringer Settings
¤
Set volume and ringtone (see "Settings
for individual functions").
Press the display key to con-
§Yes§
firm the prompt.
Handset settings
¢
and press .
§Save§
¢
All
17