Pc Interface; Writing And Editing A Text Message - Siemens Gigaset SL55 Owner's Manual

Notes on user guide
Date:
Enter the day, month and year as 8 dig-
its.
The second line is marked with [ ] to
show it is active.
¤
Enter the date using the digit keys.
Time:
Enter hours/minutes in 4-digit format.
¤
Press the s key.
The fourth line is marked with [ ] to show
it is active.
¤
Enter the date using the digit keys.
¤
Save changes.
¤
Press the display key
¤
Then press and hold the a key.
The handset switches to idle status.

PC Interface

You can connect the handset to your com-
puter using a data cable (page 28). Your
computer can then communicate with
your handset via a program (free down-
load at www.siemens.com/
gigasetSL550). You can access your hand-
set's directory and download sounds
(.mid) and pictures (.bmp) for the screen-
saver from your computer to the handset.
During the transfer of data between hand-
set and PC, you will see
display. During this time, it is not possible
to use the keypad and incoming calls will
be ignored.
26
.
§Save§
Data Transfer on the
Writing and editing a text
message
The following rules apply when writing a
text message:
Control the cursor with u v t
u
s.
u
Characters are added to the left of the
cursor.
Press the star key * to show the
u
table of special characters.
u
The first letter of the name of directory
entries is automatically capitalised, fol-
lowed by lower case letters.
You can call up the table of special charac-
ters when writing an SMS (depending on
base station) using the
the required character and insert it with
.
§Insert§
Writing an SMS/name (without
predictive text)
When you press and hold a key, the char-
acters of that key appear in the display and
are highlighted one after the other. When
you release the key the highlighted char-
acter is inserted into the input field.
Press the hash key # briefly to switch
from "Abc" mode to "123" and from "123"
to "abc" and from "abc" to "Abc" (upper
case: 1st letter upper case, all others lower
case). Press the hash key # before
entering the letter.
You can see in the display whether upper
case, lower case or digits is selected.
*
key. Select