Activating/Deactivating Auto Answer; Changing The Speaker/Earpiece Volume; Handset Volume; Large Font - Siemens Gigaset C610H User Giude

Setting the handset
Setting large font
You can increase the font size of print and
symbols in call lists and in the directory to
improve readability. After doing this, only
one entry instead of multiple entries can be
shown at the same time on each display and
names are shortened where necessary.
Ï
¢ ¢
v
Display
§Change§
Press display key (³= on).
Setting the colour scheme
You can set the display to have a dark or light
background.
Ï
¢ ¢
v
Display
Select Colour Scheme
§OK§
and press .
•
Setting the display backlight
Depending on whether or not the handset is
in the charging cradle, you can activate or
deactivate the backlight. If it is activated, the
display is permanently dimmed. If the back-
light is deactivated it is switched on by
pressing any key. Digit keys appear on the
display for pre-dialling; all other keys do not
have any further functions.
Ï
¢ ¢
v
Display
The current setting is displayed.
¤
You can enter data in the following fields:
In Charger
Select On or Off.
Out of Charger
Select On or Off.
Please note
With the On setting, the standby time
of the handset can be significantly
reduced.
§Save§
Press the display key.
40
¢

Large Font

¢

Colour Schemes

1 2
or Colour Scheme
¢

Backlight

•
Activating/deactivating

auto answer

When this function is activated, when a call
arrives, you can simply lift the handset out of
the charging cradle without having to press
the talk key c.
Ï
¢ ¢
v
Telephony
§Change§
Press display key (³= on).
Changing the speaker/
earpiece volume
You can set the loudspeaker volume for
handsfree mode and the earpiece volume to
five different levels.
In idle status:
t
Call up the Handset Volume
menu.
r
Set the earpiece volume.
s
Scroll to the Speaker: line.
r
Set the speaker volume.
§Save§
Press the display key if neces-
sary to save the setting perma-
nently.
Setting the volume during a call:
t
Press the control key.
r
Select volume.
The setting will automatically be saved after
approximately 3 seconds, if not then press
§Save§
the display key .
If t is assigned a different function:
§Options§
Open menu.
Volume Select and press
Configure setting (see above).
Please note
You can also set the call volume using the
¢
menu ( page 25).
¢
Auto Answer
§OK§
.