Table of Contents
Advertisement
Special messages
IMPORTANT
Procedure in case of malfunctions
In case of a malfunction of the tacho-
graph, you as the driver are obliged to
record the details about activities which
the tachograph no longer correctly re-
cords or prints on a separate sheet or
on the back of the printout.
è Recording activities manually [} 54]
Driving time warnings
Driving time
• The message
warning
warns the driver when he
exceeds the driving time.
• This message is displayed with flash-
ing background lighting and must be
confirmed by pressing the button .
Operational notes
The operating notes are displayed
without flashing background lighting and
disappear (except for individual mes-
sages) automatically after 3 or
30 seconds.
© Continental Automotive GmbH
DTCO 4.0-enabled display
instruments
If a display instrument is installed in the
vehicle which can communicate with the
DTCO 4.0, the function control
ates messages of the DTCO 4.0.
IMPORTANT
For detailed information, please read
the operating manual for your vehicle.
► Acknowledgement of messages
1. Press button . You have confirmed
the message and the background
lighting stops flashing.
2. Re-press the button . The message
disappears and the previously set
standard display is shown.
Notes:
An operating note disappears after
pressing the button
for the first time.
If there are several messages, you must
confirm the messages one by one.
■ Special messages
► Production status
indic-
10:30
Fig. 116: Standard display production status
If the DTCO 4.0 is not activated as the
control device, the
status
is displayed, symbol
The DTCO 4.0 accepts solely the work-
shop card.
IMPORTANT
Get an authorised specialist workshop
to put the DTCO 4.0 into operation
properly.
Messages
8
0km/h
56.7km
production
(1).
97
Advertisement
Table of Contents
