Table of Contents
Advertisement
For your safety
2
ATTENTION
Do not damage sealings and seals
Otherwise, the DTCO 4.0 is in an unli-
censed state and the data is no longer
reliable.
ATTENTION
Do not manipulate data
It is forbidden to falsify, suppress or
destroy tachograph recordings, the
tachograph cards and the printed docu-
ments.
ATTENTION
Do not manipulate the DTCO 4.0
Any person carrying out modifications
to the tachograph or the signal supply
which impact on the registration and
storage of the tachograph, especially
with fraudulent intent, violates legal pro-
visions.
16
► DTCO 4.0 ADR (Ex version)
For better clarity, all details (particularit-
ies in relation to the operation and relev-
ant safety information) regarding the ex
version ADR have been summarised in
one single chapter.
RISK OF EXPLOSION!
Explosion risk due to residual
voltages and open interfaces
In explosive areas, pressing the buttons
of the DTCO 4.0, inserting cards or
opening the printer tray or the front in-
terface poses an explosion risk.
• Please observe the instructions for
the transport and handling of haz-
ardous goods in explosive environ-
ments.
è ADR version (Ex version) [} 24]
■ Legal requirements
ATTENTION
Legal requirements of other coun-
tries
This instruction manual does not list the
legal requirements of individual coun-
tries, and these must also be observed.
The use of tachographs is regulated by
the following regulations and directives:
• Regulation (EU) 165/2014
• Regulation (EC) 561/2006
• Directive 2006/22/EC
The most recent versions apply.
By means of these Regulations, the
European Parliament assigns a number
of duties and responsibilities to the driver
of the vehicle as well as to its owner
(contractor).
In addition, the respective national laws
must also be observed.
Operating instructions DTCO 4.0 - Edition 11.2018 - A2C19916900
Legal requirements
Advertisement
Table of Contents
