Key Settings (Overview); Remote Control - VDO DTCO 4.0 Instruction Manual

Key settings (overview)

The front interface is located under a
cover.
The access rights to the functions of this
interface depend on the inserted tacho-
graph card.
è Access rights of the tachograph cards
[} 28]
© Continental Automotive GmbH
■ Key settings (overview)
The key settings of the DTCO 4.0 in-
clude:
• Entering the vehicle registration num-
ber and the country of registration (if
not already carried out by the work-
shop)
è Inserting member state and vehicle
registration number [} 67]
• Activity changes when the ignition is
off
è Automatic activities after ignition
on/off (default) [} 38]
• Recording of speed and engine speed
profiles
è Printing speed profiles (option)
[} 87]
• D1/D2 Status detection
è Shift start – Inserting driver card
[} 48]
• VDO Counter display (option)
è VDO Counter (option) [} 74]
Device description

■ Remote control

The DTCO 4.0 can be remotely con-
trolled. To do this, you will need:
®
• DTCO SmartLink (pluggable
Bluetooth interface)
• Device with Bluetooth interface, e.g.
smartphone or test device
• Application software (app) on the
device
è DTCO® Smart Link [} 145]
You can activate the remote control on
the DTCO 4.0 yourself and then use a li-
cence code to link the tachograph with
your mobile device.
è Activating remote control [} 89]
Entering the vehicle registration
number
The entry of the vehicle registration num-
ber and the authorising member state
can also be carried out via an app in
®
connection with the DTCO SmartLink.
3
23