Driver Card Functions - VDO DTCO 4.0 Instruction Manual

Operation by the driver
Operation by the driver
5

■ Driver card functions

The driver uses the driver card to identify
himself on the DTCO 4.0.
It is used for normal driving operations
and allows the storage, display, printout
or (with driver card inserted) download of
activities.
IMPORTANT
The driver card is not transferable.
IMPORTANT
Menus for the display and the printout
of driver data are only available if a cor-
responding card is inserted.
For example, the menu point
tout driver 2
is only displayed if
a driver card is inserted into card
drawer 2.
48
■ Shift start – Inserting driver
card
IMPORTANT
Operation by driver corresponds
to operating mode Operation accord-
ing to Implementation Regulation
(EU) 2016/799 Annex I C, as amended.
è Operating modes (overview) [} 25]
IMPORTANT
To operate the ADR version, the igni-
tion must be switched on.
Please take note of the special safety
information for the operation of the
ADR version of the DTCO 4.0 in ex-
plosive environments.
è ADR version (Ex version) [} 24]
Prin-
► 1. Inserting card
At the start of your shift (start of your
workday), insert your driver card into the
card drawer.
è Inserting card [} 41]
By inserting the driver card, the language
stored on the card is set on the display.
IMPORTANT
You can set the language in the menu.
è Setting the language [} 73]
The menu displayed guides you step by
step to the complete operational readi-
ness of the DTCO 4.0:
welcome
16:00
Fig. 16: Greeting display
Greeting text: For approx. 3 seconds, the
16:00
set local time
14:00 UTC are displayed (time differ-
ence = 2 hours).
No entries are possible while the card is
being read.
If a button is pressed, a message is dis-
played:
Operating instructions DTCO 4.0 - Edition 11.2018 - A2C19916900
Driver card functions
14:00UTC

and the UTC time