Table of Contents
Advertisement
– EN –
a possible cause of injury have been avoided or made as safe
as possible.
■
In case of enquiry, please contact your KETTLER dealer.
■
If the equipment is in regular use, check all its components
thoroughly every 1–2 months. Pay particular attention to the
tightness of bolts and nuts. This is particularly true for the attach-
ment of grip strap, running plate and fastening of the handlebar
and front tube.
■
Before beginning your program of exercise, consult your doctor
to ensure that you are fit enough to use the equipment. Base
your program of exercise on the advice given by your doctor.
Incorrect or excessive exercise may damage your health!
■
Before use, always check all screws and plug-in connections as
well as respective safety devices fit correctly.
■
Always wear suitable shoes when using.
■
Our products are subject to a constant innovative quality assu-
rance. We reserve the right to perform technical modifications.
■
The location for the device must be selected such that a suffi-
cient and safe distance from any obstacles is maintained. In the
immediate vicinity of the main operational directions, nothing
else should be placed. There should be at least one meter of
free space surrounding the exercise space.
Make sure that no one, other than the person who is training, is
in the device space when the device is in motion.
■
Always observe the general safety rules and precautions for wor-
king with electrical equipment.
■
Do not use a multiple power socket for the running belt. If an ex-
tension cable is being used, ensure that it complies with the VDE
regulations.
■
Unplug the power cord of the device from the socket if not used
for a longer period.
Instructions for Assembly
!
RISK!
Ensure that your working area is free of possible sources
of danger, for example don't leave any tools lying around. Al-
ways dispose packaging material in such a way that it may
not cause any danger. There is always a risk of suffocation if
children play with plastic bags!
!
WARNING!
Please note that there is always a danger of injury
when working with tools or doing manual work. Therefore
please be careful when assembling this machine.
■
Ensure that you have received all the parts required (see check
list) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.
■
Before assembling the equipment, study the drawings carefully
and carry out the operations in the order shown by the dia-
grams. The correct sequence is given in capital letters.
Handling the equipment
■
Before using the equipment for exercise, check carefully to en-
sure that it has been correctly assembled.
■
It is not recommended to use or store the apparatus in a damp
room as this may cause it to rust. Please ensure that no part of
the machine comes in contact with liquids (drinks, perspiration
etc.). This may cause corrosion.
■
The product is not suitable for use by persons weighing over
150 kg.
■
Nobody may be in the moving range of a training person du-
ring training
■
This exercise machine may only be used for exercises indicated
in the training instructions.
■
This training device has to be set up on a horizontal surface
under all circumstances. Place rubber or straw mats under it to
deaden any noise or impacts. Only for appliances with weights.
Avoid powerful oscillations of the dumbbells!
■
When mounting the product please take the recommended tor-
que information into account (
07691-400 Skylon 4
■
The training device corresponds with DIN EN ISO 20957-
1:2014 / DIN EN ISO 20957-9:2017, class HB. This statio-
nary training equipment is not suitable for high accuracy
purposes.
!
Attention! Only use with 9/24V original power supply.
Otherwise this may result in damage
!
The device may only be used with the power supply units deli-
vered (depending on the device, type (NCE / Kettler Typ: EW-
AD0910001E).
07691-600 Skylon 6 / 07691-800 Skylon 10
■
The training device corresponds with DIN EN ISO 20957-
1:2014 / DIN EN ISO 20957-9:2017, class HA.
!
Attention! Only use with 24V original power supply.
Otherwise this may result in damage
!
The device may only be used with the power supply units deli-
vered
(depending
CP123A0240V2500 or 15.3819 or YS50-2402500).
■
The equipment must be assembled with due care by an adult
person. If in doubt call upon the help of a second person, if
possible technically talented.
■
The fastening material required for each assembly step is shown
in the diagram inset. Use the fastening material exactly as in-
structed.
■
Bolt all the parts together loosely at first, and check that they
have been assembled correctly. Tighten the locknuts by hand
until resistance is felt, then use spanner to finally tighten nuts
completely against resistance (locking device). Then check that
all screw connections have been tightened firmly. Attention:
once locknuts have been unscrewed they no longer function cor-
rectly (the locking device is destroyed), and must be replaced.
■
For technical reasons, we reserve the right to carry out prelimi-
nary assembly work (e.g. addition of tubing plugs).
■
The machine is designed for use by adults and children should
not be allowed to play with it. Children at play behave unpre-
dictably and dangerous situations may occur for which the ma-
nufacturer cannot be held liable. If, in spite of this, children are
allowed to use the equipment, ensure that they are instructed in
its proper use and supervised accordingly.
= xx Nm).
on
the
device,
type
NCE
5
Hide quick links:
Advertisement
Table of Contents
