Adjusting Audio Level In The Direct Operation (Portable Hri Mode) - Yaesu Wires-X Instruction Manual

⿟ Audio level adjustment of transmission (PC speaker output level)
1. Click the "OS Volume Mixer".
The Windows "Volume Mixer" window opens.
2. Click the "Start".
Portable Digital Node station transceiver transmits.
3. It is received by the C4FM digital transceiver which
has the same setting as the frequency and the DG-ID
number of the Portable Digital Node station.
4. Adjust the [WIRES-X slider] of the Volume Mixer so that
it will be distortion free received sound.
• I f t h e s p e a k e r o u t p u t i s m u t e d , c l i c k
t h e i c o n "
release the mute "
• If the audio level of the transmission is too high or
too low, the sound may be distorted.
5. Click the [TX] to stop transmits.
6. Click the "×" button at the top right of the "Volume
Mixer" window to close.
The audio level adjustment of Access Point is completed.

Adjusting Audio Level in the Direct Operation (Portable HRI Mode)

Audio level adjustment should be done with no connection to the node station or room.
⿟ Adjusting the microphone input level of the personal computer
1. From the "View" menu, click "Audio adjustment".
The "Audio adjustment" window will appear.
" at the bottom of the slider to
".
32