Sherwood RD-6513 Operating Instructions Manual page 26

RD-6513(A) 2008.8.21 12:19 PM 페이지 27
Dubbing the audio and video signals separately onto VIDEO 1
Example) When dubbing the VIDEO 2 video signal and the CD audio signal separately onto VIDEO 1.
1.
Select VIDEO 2 as a video recording source.
2.
Select CD as an audio recording source.
3.
Start recording on the VIDEO 1.
4.
Start play on the VIDEO 2 and the CD respectively.
• The audio signal from the CD and the video signal from the VIDEO 2 will be dubbed and you can enjoy them on the TV set
and from the speakers.
Note :
• Be sure to observe the order of the above steps 1 and 2.
27