Sherwood RD-6500 Operation Instructions Manual page 12

Adjusting the tone(bass and treble)
Enter the tone mode.
10
TONE MODE
• Each time this button is pressed, the corresponding
tone mode is selected and shown for 3 seconds as
follows:
BASS TRBL(treble)
Note: When the TONE DIRECT indicator is
lighting up, the tone mode cannot be entered.
To listen to a program source without the
12
tone effect.
TONE
DIRECT
At the desired tone mode, adjust the tone
11
as desired.
• If the tone display disappears, start from the step 10
again.
Notes:
• Extreme settings at high volume may damage your
speakers.
• When the digital signals from Dolby Digital
program sources are input in available surround
mode, the tone cannot be adjusted and the tone
direct function is automatically switched to ON.
• The TONE DIRECT indicator lights up and the
sound that bypasses the tone circuitry will be heard.
• To cancel the tone direct function, press this button
again.
12
ADJUST