C Omp O N E N T V I D E O S E T U P; R E T U R N : B A C K - Sherwood Newcastle R-865 Operating Instructions Manual

When selecting the OSD AUTO DISPLAY
• When the OSD AUTO DISPLAY is set to On, the
current status display overlaps the program image on
the monitor TV and may interfere with your movie
enjoyment. In such a case, set the OSD AUTO
DISPLAY to Off.
Press the CURSOR UP( )/DOWN( )
1
buttons to select the OSD AUTO
DISPLAY.
When selecting the CURRENT VIDEO
• You can select a video input source on the OSD
menu and enjoy its image.
Press the CURSOR UP( )/DOWN( )
1
buttons to select the CURRENT VIDEO.
When selecting the COMPONENT VIDEO SETUP
• You should assign the connected COMPONENT VIDEO INs to the desired of VIDEO 1~4.
(For details, refer to "CONNECTING VIDEO COMPONENTS" on page 6~7.)
Press the CURSOR UP( )/DOWN( ) buttons to select the COMPONENT VIDEO SETUP, then press
1
the ENTER button.
Press the CURSOR LEFT( )/RIGHT( )
2
buttons to select the desired mode.
• Each time these buttons are pressed, the mode
changes as follows:
On : To turn on the current status display.
Off : To turn off the current status display.
Press the CURSOR LEFT( )/RIGHT( )
2
buttons to select the desired video input
source.
• Each time these buttons are pressed, the video
input source changes.
C O M P O N E N T V I D E O S E T U P
V I D E O 1
V I D E O 2
V I D E O 3
V I D E O 4

R E T U R N : B a c k

59
: I N 1
: I N 2
:
None
: None
, : S e l e c t