Sherwood Newcastle V-756 Operating Instructions Manual page 42

Continued
When selecting the FAVORITE CONDITION
Each time a DVD Video is loaded, the LANGUAGE, TV SCREEN and PROGRAM MENU settitings should be
adjusted to your favorite condition.
However, once the LANGUAGE, TV SCREEN and PROGRAM MENU settings for a DVD Video are memorized
using the SAVE FC (Favorite Condition), each time a disc is loaded, your chosen settings will be selected
automatically.
After adjusting the LANGUAGE and TV SCREEN settings to your favorite condition, tilt the
1
CURSOR/ENTER button upward or downward to select the FAVORITE CONDITION, then press
the CURSOR/ENTER button.
RC
■Memorizing the favorite condition for the LANGUAGE, TV SCREEN and PROGRAM MENU on the
current disc.
Each favorite condition for up to 30 DVD Videos can be memorized.
Tilt the CURSOR/ENTER button upward or downward to select the SAVE FC, then press the
2
CURSOR/ENTER button.
The EDIT TITLE mode that requires
entering a disc title.
Tilt the CURSOR/ENTER button upward or downward to enter the disc title as your preference.
3
Each time the CURSOR/ENTER button is tilted upward or downward, the characters change as
follows ;
Tilt the CURSOR/ENTER button right or left to move to the next digit after a character is entered
4
on the digit.
Repeat the above steps ③ and ④ until the preferred disc title is entered.
5
Up to 8 characters can be entered.
Note : When the disc title is not entered, the favorite condition cannot be memorized.
Press the CURSOR/ENTER button to memorize the LANGUAGE, TV SCREEN and PROGRAM
6
MENU settings along with the title entered.
Then these are memorized and the FAVORITE COND ON is displayed on the DISC SETUP
menu screen.
After you change the favorite condition for the LANGUAGE, TV SCREEN and PROGRAM
MENU on the same disc, if you perform the above steps ①~⑥, the changed condition is
memorized.
■Correcting a disc title
1. In the EDIT TITLE mode, tilt the CURSOR/ENTER button right or left to move to the character you want.
2. Tilt the CURSOR/ENTER button upward or downward repeatedly to select the preferred character.
On a character, if the CLEAR button on the remote control is pressed, the character is cleared.
3. Repeat the above steps 1 and 2 until the disc title is corrected as to your preference.
RC
→ 0 ↔ 1 ↔ 2 ↔ --------- ↔ A ↔ B -------- ↔ X ↔ Y ↔ Z ←
42
FAVORITE CONDITION menu
S A V E F C
F A C T O R Y D E F A U L T S
R E L O A D F C
EDIT TITLE mode
E D I T T I T L E
- - - - - - - -