Setting The Audio Setup - Sherwood Newcastle V-756 Operating Instructions Manual

SETTING THE AUDIO SETUP

A U D I O S E T U P
D I G I T A L O U T P U
D R C
S U R R O U N D D O L
S P E A K E R O P T I O N S
R E T U R N : ⊃ S E T U P :
When selecting the DIGITAL OUTPUT
When the DIGITAL OUTs of the unit are connected to the corresponding DIGITAL INs of an amplifier with built-
in decoder, etc., this item should be set correctly.
Notes :
When the DIGITAL OUT of this unit is connected to the DIGITAL IN of an amplifier which does not contain a
Dolby Digital, DTS or MPEG Multichannel decoder,etc.(which processes the bitstream signal), you should set
the DIGITAL OUT to LINEAR PCM. If not, loud noise may be heard from the speakers, that could be harmful to
your ears and damage the speakers.
When connecting to the DIGITAL IN of an MD or CD recorder for digital recording, you should set the DIGITAL
OUT to LINEAR PCM. If not, the digital recording will not perform properly.
When the DIGITAL OUT is set to LINEAR PCM, the multi-channel signal format (front L, center, front R, rear L
and R) is mixed down to 2 channels and converted to a linear PCM signal.
Tilt the CURSOR/ENTER button upward or downward to select the DIGITAL OUTPUT, then
1
press the CURSOR/ENTER button.
RC
Tilt the CURSOR/ENTER button upward
2
or downward to select the correct digital
audio signal format, then press the
CURSOR/ENTER button.
RC
The selected format is highighted.
S E L E C T : +
T B I T S T R M
S T A N D A R D T V
B Y P R O L O G I C
F I N I S H
RC
RC
To select the bitstream or linear PCM as digital audio signal format
To select a preferred dynamic range control
To select a preferred surround sound
To select a preferred speaker option
O U T P U T T Y P E
B I T S T R E A M
L I N E A R
R E T U R N : ⊃ S E T U P :
For your reference, the following chart shows the
relationship between types of playback discs and
digital audio output signals.
Playback discs
DVD Video with 48 kHz,
48 kHz, 16 bit linear
16 bit linear PCM
PCM
DVD Video with 48 kHz,
48 kHz, 20/24 bit linear
20/24 bit linear PCM
PCM
DVD Video with 96 kHz,
48 kHz, 24 bit linear
linear PCM
PCM
DVD Video with DTS
DVD Video with Dolby
Dolby Digital bitstream
Digital
DVD Video with MPEG
MPEG bitstream
audio
Audio CD
44.1 kHz, 16 bit linear
PCM
Audio CD with DTS DTS bitstream
32
To output
S E L E C T : +
the digital
audio signal
as it was
recorded
P C M To convert
the bitstream
signal to the
linear PCM
signal and to
output it
F I N I S H
Digital audio output
BITSTREAM LINEAR PCM
48 kHz, 16 bit linear
PCM
48 kHz, 20 bit linear
PCM
48 kHz, 24 bit linear
PCM
48 kHz, 20 bit linear
DTS bitstream
PCM
48 kHz, 16 bit linear
PCM
48 kHz, 16 bit linear
PCM
44.1 kHz, 16 bit linear
PCM
44.1 kHz, 20 bit linear
PCM