Enhancing Your System - Sharp CD-G20000 Operation Manual

Enhancing your system

The connection cord is not included. Purchase a commercially
available cord as shown below.
Game system, VCR,
DVD player, etc.
To the line output jacks
White Yellow
Red
Video cable
(not supplied)
TV
To video
input jack
Yellow
Video cable
(not supplied)
Yellow White Red
RCA cord
(not supplied)
ANTENNA
FM GND AM
75 OHMS
VIDEO
OUT
Yellow
REAR SPEAKERS
RIGHT LEFT
RATED SPEAKER IMPEDANCE : 16 OHMS MIN.
Listening to sounds of Game, VCR, DVD, etc.
1
Connect a video game system, VCR, DVD, etc. to the front
GAME INPUT (VIDEO, AUDIO L and R) jacks.
2
Connect a TV to the rear VIDEO OUT jack.
Switch the TV input to auxiliary.
3
Press the ON/STAND-BY button to turn the power on.
4
Press the GAME/VIDEO button.
5
Play the connected equipment.
You can enjoy sounds from the supplied speakers and images
on the TV.
Note:
To prevent noise interference, place the unit away from the television.
Auto power on function:
When you press any of the following buttons, the unit turns on.
GAME/VIDEO button (main unit and remote control): The unit
turns on and the "GAME" function is activated.
/ button on the main unit: The unit turns on and playback of
the last function starts (CD, TAPE, TUNER, GAME/VIDEO).
To record sounds of Game, VCR etc.
1
Insert a cassette in the TAPE 2 cassette compartment.
2
Press the GAME/VIDEO button.
3
Press the button.
4
Press the / button.
5
Play the game system, VCR, etc.
CD-G20000
CP-G20000S
41