Table of Contents
Advertisement
Advanced CD or MP3/WMA disc playback (continued)
CD-G20000
CP-G20000S
Programmed play
You can choose up to 32 selections for playback in the order you like.
1
While in the stop mode, press the
MEMORY button to enter the pro-
gramming save mode.
2
Press one of the
to select the desired disc.
3
Press the direct search buttons
on the remote control to select
the desired track.
You can also select a track by pressing the
4
Press the MEMORY button to save
the track number.
5
Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be
programmed.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR/DIMMER button.
6
Press the
(CD ) button.
The total number in memory will
appear.
7
Press the
/
button to start playback.
26
1 -
5 buttons
Selected disc number
Selected track number
or
To clear the programmed selections:
Press the CLEAR/DIMMER button on the
remote control while the "MEMORY" indicator
is flashing.
Each time the button is pressed, one track will
be cleared, beginning with the last track
programmed.
To cancel the programmed play mode:
While in the stop mode and the "MEMORY" indicator is lit, press the
CLEAR/DIMMER button on the remote control. The "MEMORY"
indicator will disappear and all the programmed contents will be
cleared.
Adding tracks to the program:
If a program has been previously stored, the "MEMORY" indicator
will be displayed. Then follow steps 1 - 6 to add tracks. The new
tracks will be stored after the last track of the original program.
To check which tracks are programmed:
While the unit is stopped in the programmed play mode, press the
button.
or
button.
Notes:
When a disc with programmed tracks is ejected, the program is
automatically canceled.
Even if you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD to another, the programmed
selections will not be cleared.
During the program operation, random play is not possible.
Hide quick links:
Advertisement
Table of Contents
