Sharp CD-G20000 Operation Manual page 14

System connections (continued)
CD-G20000
CP-G20000S
Make sure to unplug the AC power cord of the main unit before
making any connections.
Connecting the subwoofer
Use the subwoofer cable to connect the SUBWOOFER PRE-OUT
jack on the main unit and the SUBWOOFER IN jack on the active
subwoofer.
Main unit
Active subwoofer
14
ANTENNA
FM GND AM
75 OHMS
VIDEO
OUT
To subwoofer
output jack
REAR SPEAKERS
RIGHT LEFT
RATED SPEAKER IMPEDANCE : 16 OHMS MIN.
Subwoofer cable
To subwoofer
input jack
AC power connection
After checking all the connections have been made correctly, plug
the AC power cord of this unit into the AC outlet. If you plug in the unit
first, the unit will enter the demonstration mode.
ANTENNA
FM GND AM
75 OHMS
VIDEO
OUT
REAR SPEAKERS
RIGHT LEFT
RATED SPEAKER IMPEDANCE : 16 OHMS MIN.
Active subwoofer
Notes:
The unit will start the tape initialization when plugged in to the AC
outlet. During this process, an initializing sound will be heard and
the unit cannot be turned on. Wait until the process is finished.
Unplug the AC power cord from the AC outlet if the unit will not be
in use for a prolonged period of time.
AC outlet
(AC 120 V, 60 Hz)
AC outlet
(AC 120 V, 60 Hz)