Remote Control Specifications - Rinnai HINRA35M Operation Manual

Remote Control Specifications

Model RG36F5/BGEF
3.0V( 2x AAA 1.5 Volt Batteries)
Rated Voltage
Signal Receiving Range
8m
。 。
Environment
-5 C ~ 60 C
Performance Features
1. Operating Modes: AUTO, COOL, DRY, HEAT and FAN.
2. Timer Setting Function in 24 hours.
3. Indoor Setting Temperature Range : 17 C~30 C.
4. Full function LCD (Liquid Crystal Display).
NOTE:
Remote control button design may be slightly different from the one
supplied depending on the individual model
All the functions described are associated with the relative indoor unit.
If the indoor unit does not have a particular feature, there is no
corresponding operation performed by the indoor unit.
。 。
3
Function Buttons
ON/OFF Button
1
Operation starts when this button is pressed
and stops when this button is pressed again.
MODE Button
2
Each time the button is pressed, the operation
mode is selected in a sequence as follows:
1
8
ON/OFF Swing
3
9
TEMP Used to stop or start horizontal louver move-
ment or set the desired up/down air flow
direction. The louver changes 6 degree in angle
2
SHORT
MODE
10
CUT
for each press. If pressed for more than 2
seconds, the louver will swing up and down
FAN
3
automatically.
SPEED
SWING 11
Swing
4
Used to stop or start vertical louver movement
12
4 TIMER
SWING ON
and set the desired left/right air flow direction.
The vertical louver changes 6 degree in angle
TIMER 13
5 SLEEP
OFF for each press. And the temperature display
area of indoor unit displays
TURBO LED
second. If pressed for more than 2 seconds,
14
6 SELF
FOLLOW
CLEAN ME
the vertical louver swing feature is activated.
7
And the display area of indoor unit displays
,
LOCK RESET
15
IIII
ture setting reverts back. If the vertical louver
swing feature is stopped, it displays LC and
remains on for 3 seconds.
SLEEP Button
5
Active/Disable sleep function. It maintains the
most comfortable temperature and saves energy.
For details, see "SLEEP operation" in "USER'S
MANUAL".
NOTE: While in SLEEP mode, the SLEEP mode
is cancelled when the FAN or ON/OFF buttons
are pressed.
AUTO COOL DRY HEAT FAN
Button
Button
, ,
for one
,
, flashes four times, then the tempera-
, ,
4