Advertisement
Table of Contents
Australia Pty. Ltd.
ABN 74 005 138 769
Head Office
100 Atlantic Drive,
Keysborough VIC 3173
P.O. Box 460
Braeside, Victoria 3195
Rinnai has a Service and Spare Parts network with personnel who are fully trained
and equipped to give the best service on your Rinnai appliance. If your appliance
requires service, please call our National Help Line. Rinnai recommends that this
appliance be serviced once a year.
Product Sales and Service - National
Phone: 1300 555 545* Fax: 1300 555 655*
Technical Helpline and Spare Parts
National (Mon-Fri 8am - 5.30pm EST)
Phone: 1300 555 545* Fax: 1300 300 141*
*Cost of a local call higher from mobile or public phones.
E-mail: enquiry@rinnai.com.au
For further information visit: www.rinnai.com.au
Part Number: B063803
December 2016
EQPL38586755
Issue A
Remote Control Operation Manual
cool
SET TEMP.
-
ON/OFF
+
TEMP
SHORT
MODE
CUT
FAN
SPEED
SWING
TIMER
SWING
ON
TIMER
SLEEP
OFF
TURBO
LED
LOCK
RESET
This appliance shall be installed in accordance with:
• Manufacturer's Installation Instructions
• Current AS/NZS 3000
• Local Regulations and Municipal Building Codes including local OH&S requirements
This appliance must be installed, maintained and removed by an Authorised Person.
For continued safety of this appliance it must be installed and maintained
accordance with the manufacturer's instructions.
Split Type Air Conditioner
To Suit Models
Wall Mounted
Cassette
HINRA26M
CIN050A
HINRA35M
CIN070A
HINRA50M
CIN100A
HINRA70M
CIN120A
HINRA80
CIN140A
Advertisement
Table of Contents
Related Manuals for Rinnai HINRA35M
Summary of Contents for Rinnai HINRA35M
- Page 1 • Current AS/NZS 3000 • Local Regulations and Municipal Building Codes including local OH&S requirements Rinnai has a Service and Spare Parts network with personnel who are fully trained Part Number: B063803 This appliance must be installed, maintained and removed by an Authorised Person.
-
Page 2: Table Of Contents
Handling the Remote Control CONTENTS Location of the remote control. Use the remote control within a distance of 8 Handling the Remote Control ............meters from the appliance, pointing it towards the Remote Control Specifications............receiver. Reception is confirmed by a beep. Function Buttons .... -
Page 3: Remote Control Specifications
Function Buttons Remote Control Specifications ON/OFF Button Operation starts when this button is pressed Model RG36F5/BGEF and stops when this button is pressed again. MODE Button 3.0V( 2x AAA 1.5 Volt Batteries) Rated Voltage Each time the button is pressed, the operation mode is selected in a sequence as follows: Signal Receiving Range AUTO... -
Page 4: Function Buttons
Function Buttons FAN SPEED Button TURBO/SELF CLEAN Button: Used to select the fan speed in four steps: Press this button to initiate the LED function. AUTO HIGH Press and hold this button for more than 2 seconds and the FOLLOW ME function is initiated. TIMER ON Button When the Follow Me function is activated, Press this button to initiate the auto-on time... -
Page 5: Indicators On Lcd
Indicators on LCD System Operation Auto Operation Transmission Indicator This transmission indicator lights when remote Ensure the unit is plugged in and power is control transmits signals to the indoor unit. available. The OPERATION indicator on the Mode Display display panel of the indoor unit will start Displays the current operation mode. -
Page 6: Dehumidifying (Dry) Operation
Dehumidifying (DRY) Operation Timer operation Press the TIMER ON button to set the auto-on Ensure the unit is plugged in and power is available. The OPERATION indicator on the time of the unit. Press the TIMER OFF button display panel of the indoor unit starts flashing. to set the auto-off time of the unit. - Page 7 TIMER OFF TIMER OFF CAUTION (Auto-off Operation) The TIMER OFF feature is useful when you want the The effective operation time set by the remote control for the timer function unit to turn off automatically after you go to bed. The is limited to the following settings: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, air conditioner will stop automatically at the set time.
- Page 8 TIMER ON → TIMER OFF (Off → Start → Stop operation) TIMER ON OFF This feature is useful when you want to start the air conditioner before you wake up and stop it after you leave the house. Example: Start To start the air conditioner 2 hours after setting, Stop and stop it 5 hours after setting.