Selecting The Picture Display Mode - Sharp XG-C60X Operation Manual

Selecting the Picture Display Mode

This function allows you to modify or customize the picture display mode to enhance the
input image. Depending on the input signal, you can choose "NORMAL", "FULL", "DOT BY
DOT", "BORDER", "STRETCH" or "SMART STRETCH" image.
Switching the Picture
Display Using Different
Input Signals
Press .
Each time is pressed, the display
changes as shown on page
Info
In the Dot by Dot Mode, images are dis-
played in the original resolution, therefore
they will not be enlarged.
To return to the standard image, press
while "RESIZE" is displayed on the screen.
COMPUTER
4:3 aspect ratio
Other aspect ratios
"NORMAL" is fixed when XGA (1024
Input Signal
Resolution lower than
XGA
XGA
Resolution higher than
XGA
SXGA (1280 1024)
-52
XG-C60X_E_PDF_p51_59.p65
52 and 53.
NORMAL
SVGA (800 600) 1024 768
XGA (1024 768) 1024 768
SXGA (1280 960) 1024 768
UXGA (1600 1200) 1024 768
SXGA (1280 1024) 960 768
768) signals are entered.
NORMAL
Projects a full screen image
while maintaining the aspect ratio.
4:3 aspect ratio
4:3 aspect ratio
4:3 aspect ratio
52
Screen display of the picture display mode
FULL DOT BY DOT
— 800 600
— —
— 1280
— 1600 1200
1024 768 1280 1024
Output screen image
FULL DOT BY DOT
Projects a full screen image Projects the original resolution
while ignoring the aspect ratio. signal of the image.
03.8.28, 2:10 PM
RESIZE
button
960