Connecting To An Amplifier - Sharp XG-C60X Operation Manual

Connecting to an Amplifier

Connecting to an
Amplifier or Other Audio
Components
Using a ø3.5 mm stereo minijack to RCA au-
dio cable, an amplifier or other audio compo-
nents can be connected to the AUDIO OUT-
PUT terminal.
Connect the projector to the amplifier
using a ø3.5 mm stereo minijack to
RCA audio cable (commercially
available).
Info
By using external audio components, the
volume can be amplified for better sound.
The AUDIO OUTPUT terminal allows you
to output audio to audio components from
the selected AUDIO input terminal (for
INPUT 1 and 2) or AUDIO (L/R) input ter-
minals (for INPUT 3 and 4) connected to
audiovisual equipment.
For details on Variable Audio Output (VAO)
and Fixed Audio Output (FAO), see
page 63.
A ø3.5 mm stereo minijack to RCA audio
cable (commercially available) is required
for audio input.
XG-C60X_E_PDF_p19_24.p65 21
Audio input terminal
Amplifier
ø3.5 mm stereo minijack to RCA audio cable
(commercially available)
03.8.28, 1:57 PM
-21