Advertisement
Troubleshooting
Malfunction
Cause
IS 300 without power
Fuse has blown; not
a
switched ON
Short circuit
a
IS 300 does not switch ON
Twilight setting in
a
nighttime mode during
daytime operation
Bulb burnt out
a
Mains switch OFF
a
a
Fuse blown
Detection zone not
a
correctly adjusted
IS 300 does not switch OFF
Continued movement
a
within the detection zone
Switched on light is within
a
detection zone and
switches on again as a
result of temperature
change
Set to continuous
a
operation by indoor series
switch
IS 300 keeps switching
Switched on light is within
a
ON/OFF
detection zone
Animals moving in
a
detection zone
IS 300 switches on when it
Wind is moving trees and
a
should not
bushes in the detection
zone
Cars in the street are
a
detected
Sudden temperature
a
changes due to weather
(wind, rain, snow) or
exhaust air from fans or
open windows
18
Technical specifications
Remedy
Dimensions (H x W x D):
Output:
Replace fuse, switch on
a
mains switch, check wiring
with voltage tester
Check connections
a
Readjust
a
Connection:
Replace light bulb
a
Angle of coverage:
Switch power on
a
Pivoting range of the sensor:
a
Replace fuse, check
connection if necessary
Reach:
Readjust
a
Time setting:
Twilight setting:
Type of enclosure:
Check zone and readjust if
a
necessary or apply shroud
Readjust zone or apply
a
shroud
This product complies with
Series switch to automatic
a
the European Directive on
Low-Voltage Appliances,
Adjust detection zone or
a
apply shrouds, increase
distance
Functional Warranty
Adjust detection zone or
a
apply shrouds
This STEINEL product has
been manufactured with great
Adjust detection zone or
a
care, and its operation and
apply shrouds
safety have been tested in
conformity with the current
Adjust detection zone or
a
regulations. Production is
apply shrouds
also submitted to final ran-
Adjust detection zone or
a
dom-sample testing.
install in a different place
90 x 60 x 100 mm
max. 2000 W (ohmic load, e.g. filament bulb)
max. 1000 W (uncorrected, inductive,
max. 1800 W (series corrected)
max. 500 W (parallel corrected with C = 45.6 µF)
max. 1000 W (electronic ballast, capacitive,
230 – 240 V, 50 Hz
300° with 180° angle of aperture
Fine adjustment ± 80°
max. 12 m (electronically stabilised)
10 sec. – 15 min.
2–2000 lux
IP 54
Declaration of conformity
73/23/EEC and the EMC
Directive 89/336/EEC.
STEINEL undertakes the
guarantee for perfect condi-
tion and function.
The warranty period is
36 months, starting on the
date of sale to the user. We
undertake to remedy faults
caused by material or manu-
facturing defects. This war-
ranty undertaking shall be
performed by the repair or re-
placement of the defective
parts, at our own discretion.
This warranty shall not cover
damage to wearing parts or
damage and faults caused by
incorrect operation or main-
tenance. Breakage due to a
fall is also not covered.
Further consequential dam-
age to external items is ex-
cluded.
cos φ = 0,5, e.g. fluorescent lamps)
e.g. energy-saving lamps,
max. 12 items)
Claims under warranty shall
only be accepted if the prod-
uct is sent fully assembled
and well packed complete
with sales slip or invoice
(date of purchase and deal-
er's stamp) to the appropriate
Service Centre or handed in
to the dealer within the first
6 months.
Repair Service:
Our Customer Service De-
partment will repair faults not
covered by warranty or after
the warranty period. Please
send the product well packed
to your nearest Service
Centre.
19
Advertisement
