Do not use this pipe notcher for other than its 23. Use only JET factory authorized replacement intended use. If used for other purposes, JET parts and accessories; otherwise, the warranty disclaims any real or implied warranty and holds and guarantee are null and void.
L= length; W=width; H=height The specifications in this manual were current at time of publication, but because of our policy of continuous improvement, JET reserves the right to change specifications at any time and without prior notice, without incurring obligations.
The ESN-40 Pipe Notcher is ready to run at 230-volt operation. This tool is intended for use on a circuit that has an outlet that looks like the one illustrated in Figure 6-1.
20℃~40℃ OMALA 320 MOBIL Gear 632 EP 320 40℃~80℃ OMALA 460 MOBIL Gear 634 EP 460 Table 2 8.1 Additional servicing Any additional servicing should be performed by an authorized JET service center. Figure 7-1: Sizes represent nominal dimensions of SCH 40 pipe...
Non-proprietary parts, such as fasteners, can be found at local hardware stores, or may be ordered from JET. Some parts are shown for reference only, and may not be available individually.
JET sells through distributors only. The specifications listed in JET printed materials and on official JET website are given as general information and are not binding. JET reserves the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason ®...