Table of Contents
Advertisement
P A R T N A M E S
INTERACTIVE DISPLAY
The Interactive Display spells out operating steps and shows cooking help.
Each indicator shows what function is in progress.
Indicators
SET will light when setting a program.
HEAT will light when selecting a heater mode or when a heater is in use.
MICRO will light when selecting a microwave mode or during microwave cooking.
ON will light when oven in use.
x1, x2, x3 will flash when DOUBLE/TRIPLE QTY pad is available.
B E F O R E O P E R A T I N G
• Before operating your new oven make sure you read and understand this operation manual completely.
• You may detect smoke or a burning smell when using any of the heat settings for the first time. This is normal and
is not a sign that the oven is out of order. See Refresh Cycle on page 26.
• Before the oven can be used, follow these procedures:
1. Plug in the oven. Close the door. The oven display will show only one period(.).
2. Follow directions on page 26 for using the Refresh Cycle.
• After cooking is completed, the cooling fan will continue for a short time to lower the temperature within the
oven. The display will show "NOW COOLING".
STOP/CLEAR
Touch the STOP/CLEAR pad to:
1. Erase if you make a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Return to the initial display.
4. Cancel a program during cooking, touch twice.
x1
Initial setting
x2
Double qty setting
x3
Triple qty setting
Convenience Appetizer & Snacks and Convenience Meat, Fish & Poutly have specific
double/triple settings.
Manual programs can be set by multipler. See page 23.
11
Advertisement
Table of Contents
