Sharp LC 13SH6U User Manual page 7

• A 75-ohm coaxial cable connector is built into the set for easy hookup When connecting the 75-ohm Coaxial cable
to the set, screw the 75*ohm cable to the ANT terminal
. Some cable TV companies alter "premium pay channels" Since the signals of these premium pay channels are
scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company
This converter/descrambter is necessary tar normal viewing of the scrambled channeJs (Set your TV to channe_ 3
or 4, typically one of these channels is used it"this is unknown, consult your cable TV company ) For more
specific instructions on installing cable TV, consult your cable TV company. One possible method of utilizing the
conver_er/descrambler provided by your cable TV company is explained below
Please note'_An RF switch provided with two inputs (A and B) is required (not supplied)
_A" position on the RF switch (not supplled): You can v_ew all unscrambfed channels by using the TV's channel keys
_'B"position on the RF switch (not supplied): You can view the scrambled channels via the converterldescrambler by
using the converter's channel keys
RF switch (not supplied}
_ Cable TV Line
1 (nol suppl}od} J
ConsulI your SHARP D-meier o r Service Cenler for the lype of sptlller, RF swilch or combiner lhel mighl be required
: Power Connection .... :_ :''_
Connect !o the POWER INPUT terminal of the LCD TV set using the AC cord (soppl}ed)
POWER
- AC INPUT terminal
(ACt20 V)
Household
power outlet
AC cord
• Unplug the AC ca_d!_rem Ihe power gutter when the LCD TV set is not to be used tot e long period of lime