Sharp LC 13SH6U User Manual page 26

NO SIGNAL OFF
PICTURE FLIP
Power control setting allows you to save energy
When set to "ENABLE", the power will automatically shut
down if no stgnai inputs for 5 minutes
1
Press MENU to display the Menu screen
You can set the orientation of the picture
Setting the PICTURE FLiP on the MENU screen
1
Press MENU to display the Menu screen
2 Press 4,"_ to select "OPTION"
3 Press ,A!V to select "NO SIGNAL OFF-, and press
ENTER
4 Press /AI'_ to select "ENABLE". and press ENTER
i
5 Press MENU to exit
• "DISABLE"is factory preset value
. This function can work only in TV mode
' Ir iotedered with by other broadcast or radiowaves, "NO SIGNAL
OFF" may not work
propedy even when the
broadcasl is ave_"
2
3
Press _/'_ to select "OPTION"
Press .&/V to select "PICTURE FLIP", and press
ENTER
4 Press A!v to setect the desired mode, and press
ENTER
ROTATE:
UPSIDE DOWN •
5 Press MENU to exit
Directly setting the PICTURE FLIP
NO OPERATION OFF
When set to "ENABLE", the power will automaticaJly shut
down if there is no operation for 3 hours
1 Press MENU to display the Menu screen
1
2
Press PICoFLIP to display the PICTURE FLIP screen
Press PIC FLIP to change the setting
2:
Press "_1_ to select "OPTION"
3 Press .,&/V to setect "NO OPERATION OFF", and
press ENTER
• 5 minutes belore the power shuts down, remaining
time is displayed every minute
5 Press MENU to exit
. "DISABLE"is factory preset value
[NORMAL] [MIRROR]
Normal image To display mirror images
orientation for speciat uses
UPSIDE DOWN]
To display upside down
images for special uses
[ROTATE]
TOdisplay rotated images
for special uses