Sharp LC 13SH6U User Manual page 12

Basic Operatnon
Turning On and Off the Main Power
(POWER)
POWER Indicator
O Press POWER The POWER indicator instantly changes
from red to green and the LCD TV set is turned on
On-screen display
MOI¢O
• The On-screen display disappears after a low seconds
O To turn off the main power, press POWER again
Standby
To turn off the LCD TV set
Press POWER The POWER indicator wttt turn red
To turn the LCD TV set back on
Press POWER again The POWER indicator will turn green
Switching the Input Modes
(tN PUT1/IN P UT2/IN PUI'3/'rv)
1
Turn on the power of the connected video equipment
2 Press INPUT (v)/(A) to select the applicable input
source. The screen changes in order of INPUT1,
{NPUT2, ]NPLtT3 and TV mode each time INPUT is
pressed
INPUT1 mode
I|_PUT1]
time I
INPUT2 mode
IttPUT2]
t
tNPUT3 mode
t_PUT3]
TV mode
INPUT1 :
Used for video equipmenl connected lo the COMPONENT input
terminals
INPUT2 :
Used :or video equipmentconnected to the INPUT2 lermlnel
The S-video input terminal is additionally provided lot the
INPUT2 If both the S_video lerminal and normat video
terminals are connected with cables, the S-video input
terminat takes pdodty
INPUT3 :
INPUT3 mode is Used to adjust the preset settings and IN or OUT
can be selected tNPUT3 Indication is not displayed when OUT is
setected