Changing System Settings - Sharp Aquos LC-65D90U Operation Manual

Watching TV (TV Guide On Screen)
New manual reminder
Instead of setting a reminder from the program
LISTINGS, you can set a reminder manually for a
program that you want to watch or a recording you
have set.
1
Highlight "SCHEDULE" on the Service Bar.
2
Press MENU to display the "Schedule
Options".
3
Press a/b to select "new manual reminder"
and then press ENTER.
• "Remind Options" screen displays.
Setup
Selectable items
items
date
—
start
—
end
—
channel
—
input analog/digital air/
digital cable/input 1/
input 2/input 3
power on TV yes/no
auto tune TV yes/no
frequency
once/weekly/daily/off
4
Press ENTER to highlight "schedule
reminder".
5
Press ENTER again to exit.
NOTE
• The program set to be manually reminded is listed by
channel number in the SCHEDULE.
After you initially complete Guide Setup, you can make
changes to System settings in the "SETUP" screen.
Description
Set a date to remind
Set a start time to
remind
Set an end time to
remind
Set a channel to
remind using 0–9
Set the external
device or antenna
source
When this is set to
"yes", the TV will
automatically switch
on at the time the
reminder was set for.
When this is set to
"yes", the channel will
be automatically
changed before the
reminder screen is
displayed.
Set the reminder cycle

Changing system settings

1
Press TV GUIDE and then press MENU.
2
Press a/b to select "go to Service Bar" in
"Episode Options", and then press ENTER.
3
Press c/d to select "SETUP" .
4
Press b to select "Change system settings".
5
Press ENTER to display the "Confirm Your
Settings" screen.
• If the setting details displayed on the screen is
correct, select "Yes, everything is correct", and
then press ENTER.
• If the channel lineup is incorrect, select "Yes,
but my channel lineup is incorrect", and then
press ENTER.
• If you want to change System settings, select
"No, repeat setup process" and then press
ENTER.
29