Sharp Aquos LC-65D90U Operation Manual page 29

Watching TV (TV Guide On Screen)
Delete recording
1
Highlight "SCHEDULE" on the Service Bar.
2
Press a/b to select the program you want
to delete.
3
Press MENU to display "Schedule Options".
4
Press a/b to select "delete recording", and
then press ENTER.
• Confirmation screen displays.
5
Press a/b to select "yes" or "no".
Edit recording
1
Highlight "SCHEDULE" on the Service Bar.
2
Press a/b to select the program you want
to edit.
3
Press MENU to display "Schedule Options".
4
Press a/b to select "edit recording", and then
press ENTER to display "Record Options".
• You can change the setting items again.
5
Press ENTER to highlight "schedule
recording".
6
Press ENTER again to exit.
Edit reminder
1
Highlight "SCHEDULE" on the Service Bar.
2
Press a/b to select the program you want
to edit.
3
Press MENU to display "Schedule Options".
4
Press a/b to select "edit reminder", and then
press ENTER to display "Remind Options".
• You can change the setting items again.
5
Press ENTER to highlight "schedule
reminder".
6
Press ENTER again to exit.
28
New manual recording
Aside from setting recordings using the program
LISTINGS menus, you can also define the schedule of
recordings manually by following the steps below.
1
Highlight "SCHEDULE" on the Service Bar.
2
Press MENU to display the "Schedule
Options".
3
Press a/b to select "new manual recording"
and then press ENTER.
• "Record Options" screen displays.
Setup
Selectable items
items
date
—
start
—
end
—
channel
—
input analog/digital air/
digital cable/input 1/
input 2/input 3
recorder VCR/i.LINK
frequency once/weekly/daily/off
4
Press ENTER to highlight "schedule
recording".
5
Press ENTER again to exit.
NOTE
• The program set to be manually recorded is listed by
channel number in the SCHEDULE.
Description
Set a date to record
Set a start time to
record
Set an end time to
record
Set a channel to
record using 0–9
Set the external
recording device or
antenna source
Select a recorder you
connected
Set the recording
cycle