Program Recording Using Listings Function; Using Reminder Function - Sharp Aquos LC-65D90U Operation Manual

Watching TV (TV Guide On Screen)
Program recording using LISTINGS
function
You can set any programs to record on a G-LINK
connected recording device (VCR) directly from the
LISTINGS for the appropriate day.
G
Set recording
1
Press a/b/c/d to select the program you
want to record in the LISTINGS.
2
Press MENU to display "Episode Options".
Press a/b to select "set recording", and
then press ENTER to display "Record
Options".
3
Press a/b/c/d to set the following items.
Setup
Selectable items
items
frequency once/regularly/weekly/
off
start on time/120 min early
... 120 min late
on time/120 min early
end
... 120 min late
recorder VCR/i.LINK
4
Press ENTER to highlight "schedule
recording".
5
Press ENTER again to exit.
NOTE
• Device must be selected beforehand when using i.LINK
as a recording device.
26
Using RECORD button on the remote control
• Each time you press RECORD, you can change the record

Using Reminder function

You can set this function to remind you of the screening
times for programs from LISTINGS and of programs
you have set to record.
Using Episode Options
Description
Set the recording
cycle
Set the start timing of
Setup
recording
items
Set the end timing of
frequency
recording
Set the external
power on TV
recording device
auto tune TV
when
1
Press a/b/c/d to select the program you
want to record on the LISTINGS.
2
By pressing RECORD, the program you want
to record is set to record on time. "on time"
is the default setting and can be changed.
(See page 31.)
NOTE
frequency.
1
Press a/b/c/d to select the program you
want to remind on the LISTINGS.
2
Press MENU to display "Episode Options".
Press a/b to select "set reminder", and then
press ENTER to display "Remind Options".
3
Press a/b/c/d to set the following items.
Selectable items
once/regularly/weekly/
off
yes/no
yes/no
on time/30 sec - 15
min early ... 30 sec -
15 min late
4
Press ENTER to highlight "schedule
reminder".
5
Press ENTER again to exit.
Description
Set the reminder cycle
When this is set to
"yes", the TV will
automatically switch
on at the time the
reminder was set for.
When this is set to
"yes", the channel will
be automatically
changed before the
reminder screen is
displayed.
Set the timing to
perform above two
functions