Displaying An Image From Hdmi Equipment; Input Skip - Sharp AQUOS LC-32GP1U Operation Manual

Using external equipment
Press MENU to exit,
To watch an HDMI equipment image, select
INPUT4, INPUT 5 or INPUT Gfrom "INPUT
SOURCE" menu using INPUT on the remote
control unit or on the TV.
me INPUT4
• Refer to your external equipment operation manual for the
signal type.
• "Audio Select" is only available for iNPUT 6.
• When connecting an HDMFDVI conversion adaptedcable
to the HDMI terminal, the image may not come in clearly.
Press MENU to display the MENU screen, and
then press _/I_ to select "Option".
Press A/T to select "HDMI Setup", and then
press ENTER,
This setting allows you to skip the HDMI/DVI Input on
the Input Selection operation.
Press MENU to display the MENU screen, and
then press _/1_ to select "Setup".
Press A/T to select "hTput Skip", and then
press ENTER.
Press A/T to select the Input (INPUT 4,
INPUT 5, INPUT 6 or INPUT 7) you wish to
skip, and then press ENTER.
Input 4 (HDMI)
Press A/T to select the desired item, and
then press ENTER.
Press _/1_ to select the desired setting, and
then press ENTER.
Auto View Enable Set whether or not to use
Disable View Mode based on signal
recognition,including an HDMI
signal.
Audio Digital Select "Digital"for an audio
Select Analog signalvia the HDMIterminal.
Select "Analog"for an audio
signalvia the R-AUDIO-L
terminal.
Press _/1_ to select "Yes", and then press
ENTER.
Press MENU to exit,
O- 33