Tv (Rear/Side); Simple Button Operations For Changing Channels - Sharp AQUOS LC-32GP1U Operation Manual

Watching TV
You can change channels in several ways.
-- VOL + INPUT POWER
TV TV VCR AUDIO
0 0 0
FUNOTION c%,_AT 0v0
0
SOURCE LIGHT
GE) CE)
REC
(]D CE)
INPUT FLASHBACK
O
VOL CH
FREEZE MENU
C®8
-- FAVORITE CH --
®®@@
AO.UOS
Method 1
Using CH/X/V on the remote control unit or on the
TV,
Method 2
Press FLASHBACK to switch to the previously
tuned channel.
(_ Press FLASHBACK again to switch back to the
currently tuned channel.
• FLASHBACK will not work if no channel has been
changed after the TV is turned on.
Method 3
Using remote control buttons 0-9, • (DOT) to select
channels for VHF/UHF/CATV/DIGITAL,
To select a 1 or 2-digit channel number
(e. g., Channel 5):
Press 5_ENT
• When selecting a 1-digit channel number, it is not
necessary to press 0 before the number.
• When you enter 0-9 only, channel selection will be made if
there is no operation within a few seconds.
To select a 3-digit channel number
(e. g., Channel 115):
Press 1-+1 -+5-+ENT
To select a 4-digit channel number
(e. g., Channel 22.1):
Press 2 _2_ • (DOT) _I_ENT
• When you enter 0-9 only, channel selection will be made if
there is no operation within a few seconds.
• if you push "0" by itself, nothing will happen.
• Complete the above steps within a few seconds.
• When you enter 0-9 and • (DOT), channel selection will be
made if there is no operation within a few seconds.
O- 19