Using Digital Audio Output; Connecting Hdmi Equipment; Connecting A Pc - Sharp Aquos LC 46SE94U Operation Manual

Preparation

Using Digital Audio Output

It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. (See page 31 for details.) PCM audio
outputs from the terminal.
To optical digital input of
external audio devices
• Depending on the connected equipment, audio will not output from the DIGITAL AUDIO OUTPUT terminal in HDMI
connection. In this case, set the audio formats of the connected equipment to PCM, 32/44.1/48 kHz and 16 bits.

Connecting HDMI Equipment

You can use the INPUT 4, INPUT 5 or INPUT 6 terminal when connecting HDMI equipment.
HDMI equipment
• When using an HDMI-DVI conversion cable, input the audio signal to the AUDIO terminal of INPUT 6.
• To enjoy the AQUOS 1080p display capability, connect your Blu-ray disc player, HD-DVD player or other external equipment
using an HDMI-certifi ed cable and set the equipment to 1080p output.

Connecting a PC

When connecting to a PC with an analog RGB terminal (INPUT 7):
PC
When connecting to a PC with an HDMI terminal (INPUT 4, 5 or 6):
PC
• The HDMI terminals only support digital signal.
• Refer to page 50 for a list of PC signals compatible with the TV.
14
Optical fi ber cable
(commercially available)
HDMI-certifi ed cable
(commercially available)
RGB cable
(commercially available)
Ø 3.5 mm stereo minijack cable
(commercially available)
HDMI-certifi ed cable
(commercially available)