Connecting A Set Top Box (Satellite, Cable, Etc.); Using Digital Audio Output - Sharp LC-42G77H Operation Manual

Preparation

Connecting a Set Top Box (Satellite, Cable, etc.)

You can use the INPUT 1/INPUT 2/INPUT 3 (HDMI), INPUT 4 or INPUT 5/INPUT6 (component) terminals when
connecting to a Set Top Box (Satellite, Cable, etc.) and other audiovisual equipment.
NOTE
• When using a DVI-HDMI adaptor or conversion cable, input the Audio Signal from the AUDIO terminal of INPUT 1. (See page
54.)
When using HDMI cable
(commercially available)
Ø 3.5 mm stereo
Set Top Box (STB)

Using Digital Audio Output

It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. PCM audio outputs from the terminal.
Optical fi bre cable
(commercially available)
To optical digital input of external audio devices
NOTE
• The DIGITAL AUDIO OUTPUT terminal usually outputs the same audio from the speakers. (The audio of the content you are
viewing is output from the terminal.)
• The DIGITAL AUDIO OUTPUT terminal does not output some signals, depending on devices and software.
12
minijack
When using component cable
(commercially available)
Y
P
B
(C )
B
P
R
(C )
R
L
AUDIO
R
Set Top Box (STB)