Turning On The Power; Turning Off The Power - Sharp Aquos LC 30HV2U Operation Manual

Watching TV
POWER button
POWER indicator
STANDBY/ON indicator
MAIN POWER
TV
POWER
AV
MODE
VIEW
MODE
DISPLAY
1
4
7
Display status indicator
Off Power off
Flashing red AVC System does not turn on or its AC cord is disconnected.
Red The System is in standby mode.
Green The System turns the power on.
AVC System status indicator
Off Power off
Red Only the AVC System is in standby mode or the System is in standby mode.
Green The System turns the power on.
16
Display
MAIN POWER
AVC System
TV CBL VCR DVD
/SAT /LD
/DTV
ANT-A/B INPUT
FRONT
SURROUND MTS CC
TWIN
PICTURE SELECT
SUB TWIN CH
FREEZE INPUT
SLEEP LEARN
EDIT/
2 3
5 6
8 9
0
100
ENT

Turning on the power

1
Press MAIN POWER on the Display.
• The POWER indicator on the Display flashes red.
2
Press MAIN POWER on the AVC System.
• The System turns the power on.
• The POWER indicator on the Display lights up green
and the STANDBY/ON indicator on the AVC System
lights up in green.
• If the STANDBY/ON indicator on the AVC System and
the POWER indicator on the Display still light up red,
press TV POWER on the remote control unit or MAIN
POWER on the AVC System to turn the System on.
First time turning on the AVC System
1
Press MAIN POWER on the AVC System.
• The STANDBY/ON indicator on the AVC System lights
up red.
2
Press MAIN POWER on the Display.
• The System turns the power on.
• The POWER indicator on the Display lights up green
and the STANDBY/ON indicator on the AVC System
lights up in green.
• If the STANDBY/ON indicator on the AVC System and
the POWER indicator on the Display still light up red,
press TV POWER on the remote control unit or POWER
button on the Display to turn the System on.
A
• In this manual, "System" means the Display and AVC Sysytem.

Turning off the power

1
Press TV POWER on the remote control unit or
POWER button on the Display.
• The System enters standby mode and the image on
the screen disappears.
• Both the STANDBY/ON indicator on the AVC System
and the POWER indicator on the Display change from
green to red.
2
Press MAIN POWER on the AVC System.
• The STANDBY/ON indicator on the AVC System turns
off and the POWER indicator on the Display flashes
red.
3
Press MAIN POWER on the Display.
• The POWER indicator on the Display turns off after
approximately 5 seconds.
A
• If you are not going to use this System for a long time, be sure to
remove the AC cord from the power outlet.