Preparation; Setting The System - Sharp Aquos LC 30HV2U Operation Manual

Preparation

Setting the system

Removing the terminal cover
1.
Connecting the system cable and the AC cord to the Display
2.
Connecting the system cable and the AC cord to the AVC System
AVC System (rear view)
L
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE AC
CORD CONNECTED.
8
DISPLAY OUTPUT-2
Display (rear view)
DISPLAY INPUT2
HEADPHONE
(GRAY)
Connect the plug firmly
until the hooks on both
sides click.
COMPONENT
Y P
B
INPUT 3
ANT-A ANT-B
HD INPUT
OUT ANT/CABLE 75Ω
MONITOR OUTPUT S-VIDEO VIDEO R-AUDIO-L
DISPLAY OUTPUT-1
AC INPUT
110V–240V
DISPLAY INPUT1
AC INPUT
DISPLAY INPUT2 DISPLAY INPUT1
(WHITE)
Connect the plug into
the terminal and secure
it by tightning the
thumb screws.
System cable
(GRAY)
COMPONENT
P Y P P
R B R
INPUT 1
INPUT 2
S-VIDEO VIDEO R-AUDIO-L
Press down the two
upper hooks to remove
the cover toward you.
AC cord
AC INPUT
System cable
(WHITE)
RS-232C DISPLAY OUTPUT-1
DISPLAY OUTPUT-2
AC INPUT
AC cord