Simple Button Operations For Changing Channels - Sharp Aquos LC 30HV2U Operation Manual

Watching TV
CH s/r
TV CBL VCR DVD
/SAT /LD
TV
/DTV
POWER ANT-A/B INPUT
AV FRONT
MODE SURROUND MTS
TWIN
PICTURE
SELECT
VIEW SUB TWIN CH
MODE FREEZE INPUT
DISPLAY SLEEP LEARN
EDIT/
1 2 3
4 5 6
7 8 9
0
100
FLASHBACK
VOL
MUTE
18
Display
Channel display
(The image displays an example.)
38
CC
ANT-A
STEREO
ENT
CH
1 – –
11
Simple button operations for
changing channels
Using CHa/b on the remote control unit
• Press CHa a a a a to increase the channel number.
• Press CHb b b b b to decrease the channel number.
A
• CH s/r on the Display operates the same as CHa a a a a /b b b b b
on the remote control unit.
Changing channels with CH a/b on the
remote control unit or CH s/r on the
Display
Air: Press CH a and the channel change in the
order shown below:
2s3s...s68s69s2s3...
Press CH b and the channel change in the order
shown below:
3s2s69s68s...s3s2...
Cable:Press CH a and the channel change in the
order shown below:
1s2s3s...s125s1s2s3...
Press CH b and the channel change in the order
shown below:
3s2s1s125s...s3s2s1s...
Using FLASHBACK on the remote control
unit
Press FLASHBACK to switch the currently tuned
channel to the previously tuned channel.
Press FLASHBACK again to switch back to the
currently tuned channel.
Using 0 – 9 and 100 on the remote control
unit
Select the channels directly by pressing buttons 0 to
9 and 100.
• The System allows you to select up to 125 channels
(1 to 125). To select a channel, enter a 2 or 3-digit
number.
a
To select a 1 or 2-digit channel number
0 –
(e.g., Channel 5):
Complete the following steps within 3 seconds.
5
1
Press the 0 button.
• Complete the step 2 within 3 seconds after the step 1.
2
Press the 5 button.
A
• When selecting a 1-digit channel number, do not fail to
press the 0 button.
To select a 3-digit channel number
(e.g., Channel 115):
Complete the following steps within 3 seconds.
–
1
Press the 100 button.
• Complete the step 2 within 3 seconds after the step 1.
115
2
Press the 1 button.
• Complete the step 3 within 3 seconds after the step 2.
3
Press the 5 button.