Sharp FO-DC550 Facsimile Operation Manual page 12

Menu item
16 : RCV REDUCE
17 : BEEP LENGTH
18 : RINGER VOLUME
19 : BEEPER VOLUME
20 : DIAL MODE
21 : DISTINCTIVE RING
22 : INDEX PRINT
23 : DATE&TIME FORMAT
24 : PRINT HOLD MODE
8
Settings (factory default setting appears in bold)
When a fax is received that is larger that the printing paper, enable
reduction of the fax to the size of the paper to avoid the fax being cut off.
1 : ON
2 : OFF
Set the length of the beep that sounds when fax transmission or
reception ends.
1 : 3 SEC
2 : 1 SEC
3 : NO BEEP
Set the volume of the ringer.
1 : OFF
2 : LOW
3 : MIDDLE
4 : HIGH
Set the volume of the beep that sounds when a key is pressed.
1 : OFF
2 : LOW
3 : MIDDLE
4 : HIGH
Set the dial mode for the type of line you are on.
1 : TONE
2 : PULSE
Set the ring pattern for distinctive ring.
1 : OFF
2 : STANDARD
3 : PATTERN 1
4 : PATTERN 2
5 : PATTERN 3
6 : PATTERN 4
7 : PATTERN 5
Enable printing of a black mark (index) at the top of each
received fax page.
1 : ON
2 : OFF
1 : TIME FORMAT
Select 12-hour or 24-hour format for the time set in the
machine.
1 : 12 HOUR
2 : 24 HOUR
2 : DATE FORMAT
Set the format of the date in the display and in printouts.
1 : MMDDYYYY
2 : DDMMYYYY
3 : YYYYMMDD
When this mode is enabled, received faxes are held in the
memory of the machine instead of being printed out. To print
received faxes, the passcode that was programmed using "25 :
PRINT PASSCODE" must be entered. This mode is used to
ensure that received faxes are not misplaced or taken from the
paper output tray by another person. Use "0 : HOLD DATA
PRINT" to print received faxes.
1 : ON
2 : OFF
Page
65
18
17
19
31
41
36
23
24
67