TiX620, TiX640, TiX660, TiX1000
Users Manual
Two temperature thresholds can be defined referring to
the average value ("Average"), the maximum temperature
value ("Upper limit"), or the minimum temperature value
("Lower limit") of all defined measuring objects. If no
measuring object is defined, the temperature thresholds
refer to the entire image. If at least one of the defined
conditions is fulfilled, the following actions may be
performed:
•
Visualization
Alarm indication and display of
the fulfilled condition
•
Save
Image saving in accordance
with the settings in "Saving
format"
•
COM
Alarm indication via the
RS232 interface
•
Audio
Output of an acoustic alarm
signal
•
Digital out 1
Alarm signal at digital output 1
•
Digital out 2
Alarm signal at digital output 2
3-44
Shop for Fluke products online at:
Configuration Submenu
You can save your individual device settings as device
configuration in the thermal imager. This way, you can
configure and, if required, reload user and/or application
profiles matching different requirements. Additionally, you
can define actions the camera is to perform when the
system is started. These actions are also saved to the
corresponding configuration.
The "Configuration" menu item contains the following
submenus:
•
Load
•
Save
•
Start
•
Default Settings
MyFlukeStore
www.
hvh240.jpg
1.888.610.7664
.com