Playback - Sharp TINSE0568AWZZ Operation Manual

Advanced Recording (continued)
IM-DR580H
! Creating track numbers automatically
1. In analogue recording, tracks will be numbered as
follows:
Recording from a stereo system:
By default, track numbers are created automatically after
1 second or more of silence ("MARK LEVEL-AUTO" is
selected).

Playback

side
Recording
side
Recording from a microphone:
By default, tracks are recorded as a sequence without
numbers ("MARK OFF" is selected).
Sequential recording
34
IM-DR580H(E) TINSE0568AWZZ
To change the numbering setting:
<When recording from a stereo system>
1
Press the REC button.
Light up
2
Press the MENU button.
The unit enters the menu select
mode.
3
Select "MARK" by pressing
the or button and press
the ENTER/-USB ( ) button.
4
Select the desired interval by
pressing the or button
and press the ENTER/-USB
( ) button.
LEVEL-AUTO Track numbers will be created auto-
matically by detecting 1 second or
more of silence.
TIME 10min A new track number is created ev-
ery 10 minutes.
TIME 5min A new track number is created ev-
ery 5 minutes.
TIME 3min A new track number is created ev-
ery 3 minutes.
OFF No track numbers are created auto-
matically.
03/10/15 IM-DR580H(E)4.fm
Flash