Error Messages - Sharp TINSE0568AWZZ Operation Manual

Error Messages

IM-DR580H
ERROR MES-
SAGES
" The battery has run down.
BATT EMPTY
(LoBATT)
" Nothing is recorded.
BLANK MD
(BLANK)
(Replace the disc with a recorded disc.)
" A track is being moved.
BUSY
" You tried to record from a copy prohib-
Can't COPY
ited MiniDisc.
(Record using the analogue cable.)
" You tried to record signals other than
music (such as data).
" A track cannot be edited.
Can't EDIT
(Can't E)
(Change the stop position of the track and
then edit it.)
" Stamp function does not work.
(Can't E)
(Check the number of tracks.)
" You tried to record or edit whilst the
Can't LOCK
(Can't L) compartment could not be locked.
(Reload the MiniDisc.)
" You tried to play back a track that can-
Can't PLAY
not be played with this equipment.
84
IM-DR580H(E) TINSE0568AWZZ
MEANING ERROR MES-
SAGES
Can't READ (*)
(Can't S)
Can't REC
(Can't R)
Can'tWRITE
DEFECT!
DISC FULL
(D-FULL)
DISCONNECT
(NO MIC)
Er-MD (**)
GROUP FULL
MEANING
" The disc data cannot be read because
the disc is damaged.
(Reload the Minidisc or replace it with an-
other one.)
" Recording cannot be performed cor-
rectly due to vibration or shock.
" Cannot save the TOC information cor-
rectly to a MiniDisc.
" The disc is scratched.
(If the recorded sound is not right, retry re-
cording or replace the disc with a record-
able one.)
" The disc is out of recording space.
" A recording source or a microphone is
not connected.
" The microprocessor has reported a
system fault and the unit is out of order.
(To have it repaired, go to the distributor
where you purchased the unit.)
" The total number of groups exceeds
99.
(Erase unnecessary groups.)
03/10/15 IM-DR580H(E)9.fm