Dimm Installation; Dimm Removal - Supermicro X11SDV-4C-TLN2F User Manual

DIMM Installation

1. Insert the desired number of DIMMs into
the memory slots, starting with DIMMA1,
DIMMB1, DIMMD1, DIMME1. For best
performance, please use the memory
modules of the same type and speed.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Press both ends of the module straight
down into the slot until the module snaps
into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.

DIMM Removal

Press both release tabs on the ends of the
DIMM module to unlock it. Once the DIMM
module is loosened, remove it from the
memory slot.
JIPMB1
LED3 VGA
Aspeed
AST2500
JTPM1
S-SATA0
X11SDV-4C-TLN2F
REV: 1.02
DESIGNED IN USA
DIMME1 DIMMD1
Release Tabs
Press both notches
straight down into
the memory slot.
25
Chapter 2: Installation
Intel
X557-AT2
IPMI_LAN
USB 2/3(3.0)
LAN1/LAN2
USB0/1
CPU
JF1
JF1
PWR RST X OH NIC2 NIC1 HDD PWR
ON FF LED LED
BT1 LED1
JBT1
PJ1
DIMMA1 DIMMB1
Notches