Table of Contents
Advertisement
1.2 Processor Overview
The Intel Xeon D-2100 series SoC processor family, with up to 16 cores and up to 100W of
power, offers performance, reliability, and high intelligence. As a low-power system-on-a-chip
motherboard, the X11SDV-4C/8C/8C+/12C/16C/16C+-TLN2F is optimized for a variety of
workloads that requires high compute power in a compact form-factor.
•
ACPI Power Management Logic Support Rev. 4.0a
•
Intel Turbo Boost Technology
•
Adaptive Thermal Management/Monitoring
•
PCI-E 3.0, SATA 3.0, NVMe
•
System Management Bus (SMBus) Specification Version 2.0
•
Intel Trusted Execution Technology (Intel TXT)
•
Intel Rapid Storage Technology
•
Intel Virtualization Technology for Directed I/O (Intel VT-d)
1.3 Special Features
This section describes the health monitoring features of the
X11SDV-4C/8C/8C+/12C/16C/16C+-TLN2F motherboard. The motherboard has an onboard
System Hardware Monitor chip that supports system health monitoring.
Recovery from AC Power Loss
The Basic I/O System (BIOS) provides a setting that determines how the system will respond
when AC power is lost and then restored to the system. You can choose for the system to
remain powered off (in which case you must press the power switch to turn it back on), or
for it to automatically return to the power-on state. See the Advanced BIOS Setup section
for this setting. The default setting is Last State.
1.4 System Health Monitoring
The motherboard has an onboard Baseboard Management Controller (BMC) chip that
supports system health monitoring.
17
Chapter 1: Introduction
Advertisement
Table of Contents
