Agilent Technologies 86060C Series User Manual page 74

Usage:
Query Syntax:
Example:
Usage:
Query Syntax:
Returned Format: <value>, <string>
Programming
:STATus:PRESet
:STATus:PRESet
The :STATus:PRESet command presets the enable registers for all status
nodes. Enable registers have no function in this instrument, but the command
is included for compatability with the SCPI standard.
value of each enable register.
GPIB only
:STATus:PRESet
OUTPUT 711;":STATUS:PRESET"
Table 4-5. Values of the Enable Registers
Status Node
Operation
Questionable
:SYSTem:ERRor
The :SYSTem:ERRor query returns the next error number and error descrip-
tion in the error queue over the interface. This instrument has an error queue
100 errors deep and operates on a first-in, first-out basis. Repeatedly sending
the query :SYSTEM:ERROR? returns the error numbers and descriptions in
the order in which they occur until the queue is empty. Any further queries
returns "+0,No errors" until another error occurs. Refer to
error numbers and descriptions.
GPIB and RS-232
:SYSTem:ERRor?
4-24
Table 4-5
Preset Value
0
0
shows the
Table 4-6 for the