Cleveland Steamcraft II Service Manual page 4

For additional safety information on the steam generator (boiler), refer to Installation Instructions, Operating
Instructions, and Servicing Instructions.
For additional information on steamer safety, refer to the steamer operating procedure page.
Instructions tor the occasional servicing that will be needed are given on the following pages.
Servicing beyond these instructions should not be attempted without specialized skills and experience. Such
attempts may void the warranty on the equipment
Clevetend/ALCO) maintains a list or regional parts distributors and reputable service agency tor
servicing your equipment. For the names of those in your area, call or write to Cleveland/ALCO.
Parts
The parts breakdown in this manual consists of a series of illustrations with a parts listing tor each illustration. Each
page is titled by the major assemblies or components which are illustrated thereon.
Alternate pans. older designs, and parts used exclusively in specific models (when more than one model is covered
on the page) are, when necessary tor clarity, depicted within circles on the illustration page.
How To Use The Parts* Drawing
From the illustration, determine the reference number of the pan desired. Then refer to the pans listing and locate in
the left-hand column the reference number obtained from the illustration. There you will find the part number and
description of the pan.
Component parts of an assembly or sub-assembly are clearly identified in the description column. Such components
are listed directly below the assembly and are indented from the assembly description. If the assembly is ordered,
the shipment will include all parts which are indented below the assembly description.
Directions For Ordering Parts
To ensure prompt and accurate handling, the following data should be furnished in addition to the part number and
the description:
Serial Number Model Number Electrical
Specifications (where applicable)
CLEVELAND RANGE, INC., 1333 EAST 179th ST., CLEVELAND, OHIO 44110
Manufacturer reserves right of design improvement or modification, as warranted.
LITHO IN U&A. 0388
Next Page