Anti-Tip Stability Device Installation Instructions - Fisher & Paykel OR30SDPWSX1 Installation Instructions Manual

Anti-Tip Stability Device Installation Instructions

1. The anti-tip bracket has to be attached as shown on figure below (only rear left side), it has to be fixed on the
floor OR on the rear wall by no. 4 (four) suitable screws (not supplied). Alternatively the anti-tip bracket can
also be fixed on the floor AND on the rear wall by no. 8 (eight) suitable screws (not supplied).
2. After fixing the anti-tip bracket, slide range into place. Be sure the rear left foot slides under the anti-tip bracket
attached.
https://producthelp.fisherpaykel.com/us/Cook/Ranges/Electric/OR30SDPWSX1/User_Guide_OR30SDPWSX1/02_installation_instructions
Assembling the Backguard
Updated: Fri, 08 Mar 2019 10:04:01 GMT
Powered by
7