Plugging In the Power
Plug one end of the cord into the back of the machine and the other end
into a standard AC power outlet.
This machine will turn on and the display will show 'SYSTEM INITIAL'. If
there is no paper loaded, the displays will shows 'NO PAPER.' then if
there is no cartridge installed, the display will show 'JAM/NO
CARTRIDGE'.
To AC outlet
To turn off, unplug the power cord.
Loading Paper
For best results, use high quality xerographic paper. The automatic paper
input tray can hold a maximum of 150 sheets of plain paper. The
maximum capacity may be less, depending on the paper thickness.
Note: For stand-alone copy and fax operations, this machine supports A4,
letter, and legal paper. After loading paper, make sure that you
select the correct paper size. For more information on setting the
paper size, see 'Setting User-Selectable System Options' on page
2.2.
1. Pull the paper input support completely out of the unit.
Paper input support
Automatic paper
input tray
Manual paper
input tray only
for MFP model.
1.13
Getting Started