Touch Panel; Using The Touch Panel - Sharp AR-M257 Key Operator's Manual

TOUCH PANEL

Using the touch panel

[Example 1]
JOB QUEUE SETS / PROG
003 / 000
COPY
SHARP001 003 / 000
Beep
tone
[Example 2]
1/13
COMPLETE
The confirmation beeps can be disabled in the key
operator programs. (See "Key operator's guide".)
The touch panel screens shown in this manual are
printed images and may differ from the actual screens.
Items on the touch panel
are selected by touching
the key associated with
the item. A beep will
sound to confirm that the
item was selected and
the key will be
highlighted.
* A double-beep is
sounded when an
invalid key is touched.
Keys which are grayed
out cannot be selected.
BEFORE USING THE MACHINE
Selecting a function
[Example 1]
CANCEL OK
LEFT RIGHT
BINDING BINDING
[Example 2]
If you need to cancel a selection, simply press the key
once again so that it is not highlighted.
1/
DUAL PAGE
COPY
MULTI SHOT
1/
DUAL PAGE
COPY
MULTI SHOT
[Example 3]
READY TO COPY.
ORIGINA
SPECIAL MODES
2-SIDED COPY
8½x11
8½x14
OUTPUT
Items which are
highlighted at the time a
screen appears are
already selected and will
take effect when the [OK]
key is touched.
The key is no longer
highlighted and the
selection is canceled.
When the machine is
used in copy mode or fax
mode and a special
mode is selected, a icon
representing the feature
will appear on the touch
panel. If this icon is
touched, the setting
screen of the function (or
a menu screen) will
appear, allowing the
settings to be checked,
adjusted, or canceled.
11
1