Sharp AR-C250 Operation Manual page 59

READY TO COPY.
SPECIAL MODES
COLOR ADJUSTMENTS
RGB ADJUST SHARPNESS
BRIGHTNESS INTENSITY
READY TO COPY.
SPECIAL MODES
RGB ADJUST CANCEL
ONLY ONE COLOR CAN BE ADJUSTED.
R(RED) G(GREEN)
-
-2 · -1 · · 0 · · 1 · 2
RGB ADJUST CANCEL
ONLY ONE COLOR CAN BE ADJUSTED.
R(RED) G(GREEN)
-
-2 · -1 · · 0 · · 1 ·
READY TO COPY.
CANCEL
RGB ADJUST
ONLY ONE COLOR CAN BE ADJUSTED.
R(RED) G(GREEN)
-
-2 · -1 · · 0 · · 1 ·
INTE
1 2 3
INTERRUPT
4 5 6
CLE
CLEAR
CA
AL
ALL
7 8 9
C
C
AUDIT PROGRAM
0 CLEAR
P
CL
Press the "RGB ADJUST" key on the touch panel.
4
The setting screen for RGB ADJUSTMENTS will appear.
OK
OK
SUPPRESS
BACKGROUND
CONTRAST
OK
OK
Select a color to be adjusted.
5
Select a color from R (RED), G (GREEN), and B (BLUE).
B(BLUE)
Thumbnails representing the effect of adjustments will appear.
These are representations only and do not represent the actual
+
amount of change for every copied original.
Press the "+" to strengthen the selected color or press
6
OK
the "-" key to weaken the color.
The level can be adjusted from -2 to 2 in eleven steps.
B(BLUE)
+
2
Press the upper "OK" key.
7
OK
OK
B(BLUE)
+
2
Make all other desired copier selections and enter the
8
desired number of copies.
Press the COLOR COPY START (
9
The BLACK COPY START (
However, the RGB ADJUST setting will be ignored.
To cancel the RGB ADJUST function, select the RGB ADJUST
function again and press the "CANCEL" key.
COLOR ADJUSTMENTS
READY TO COPY.
SPECIAL MODES
RGB ADJUST CANCEL
ONLY ONE COLOR CAN BE ADJUSTED.
R(RED) G(GREEN)
-
-2 · -1 · · 0 · · 1 · 2
) key can be pressed for copying.
OK
OK
B(BLUE)
+
) key.
3-17